Quicksilver Sixty Watt Mono Amplifier
The new sixty watt amp retains the high damping factor and low distortion of the Horn Mono but
with enough power to handle inefficient and difficult to drive speakers. The new power transformer
has the same high grade core material as the output transformer. Also a new circuit increases
the power tube bias at higher powers allowing the amp to have low distortion all the way up to
clipping. At reduced powers this circuit gives the efficiency, finesse and delicacy of a low
powered amplifier.
Price $2995/pair
Price for 230 volt/50hz add $100/pair
Specifications
Download Instruction Manual
| Power Output | 60 watts into 4 or 8 ohms |
| Power Bandwidth | 14 Hz to 70 KHz |
| Damping Factor | 20 |
| Input Sensitivity | 1.2 volts |
| Input Impedance | 100 Kohm |
| I.M. Distortion: | less than 0.5% at 60 watts |
| Tube Complement | two KT88, 1-12AX7, 1-12BH7 |
| Power Consumption | 100 watts at idle 200 watts at full power |
| Chassis |
Chrome over nickel
Gloss black transformer covers |
| Dimensions | 6″H, 14.5″L, 9.25″W |
| Weight | 30 lbs. each |
| U.S. Warranty | 3 years parts and labor & 90 days for tubes |